Dell PowerEdge VRTX - Manual (Page 328)

328
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Configuring GVRP Using CLI Commands
The following table summarizes the CLI commands for configuring GVRP as
displayed in the GVRP Global Parameters page.
Table 12-5. GVRP Global Parameters CLI Commands
CLI Command Description
gvrp enable
no gvrp enable
In Global Configuration mode, this
command enables GVRP globally. In
Interface Configuration mode, it
enables GVRP on the interface.
Use the no form of this command to
disable GVRP on the device.
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Enables or disables dynamic VLAN
creation.
Use the no form of this command to
enable dynamic VLAN creation or
modification.
gvrp registration-forbid
no gvrp registration-forbid
De-registers all dynamic VLANs, and
prevents dynamic VLAN registration on
the port.
Use the no form of this command to
allow dynamic registration of VLANs on
a port.
show gvrp configuration
[ interface-id ]|detailed]
Displays GVRP configuration
information, including timer values,
whether GVRP and dynamic VLAN
creation is enabled, and which ports are
running GVRP.
show gvrp error-statistics
[ interface-id ]
Displays GVRP error statistics.
show gvrp statistics
[ interface-id ]
Displays GVRP statistics.
clear gvrp statistics
[ interface-id ]
Clears all the GVRP statistics
information.