Dell PowerEdge VRTX - Manual (Page 390)

390
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_DHCP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
When DHCP snooping is disabled for a VLAN, the Binding entries that were
collected for that VLAN are removed from the Binding database.
To enable/disable DHCP snooping on a VLAN:
1 Click Switching > DHCP Snooping > VLAN Settings in the tree view to
display the VLAN Settings page.
The list of existing VLANs are displayed in the
VLAN ID list.
2 Click Add to move the VLANs, for which you want to enable DHCP
snooping, from the VLAN ID list to the Enabled VLANs list. To remove a
VLAN, click Remove to move it from the Enabled VLANs list to the
VLAN ID list.
Configuring DHCP Snooping on VLANs Using CLI Commands
The following table summarizes the CLI commands for configuring DHCP
snooping on VLANs .
The following is an example of some of the CLI commands:
Trusted Interface
To define a trusted interface:
1 Click Switching > DHCP Snooping > Trusted Interface in the tree view
to display the Trusted Interface: Summary page.
A list of the interfaces is displayed.
2 To change the trust status of an interface, click Edit, and enter the fields:
– Interface — Select a port or LAG.
– Trust Status — Enable/disable DHCP Snooping Trust mode on the
selected port or LAG.
Table 17-3. DHCP Snooping on VLANs CLI Commands
CLI Command Description
ip dhcp snooping vlan vlan-id
no ip dhcp snooping vlan-id
Enables DHCP snooping on a VLAN.
Use the no form of this command to
disable DHCP snooping on a VLAN.
console(config)# ip dhcp snooping vlan 1