Dell PowerEdge VRTX - Manual (Page 410)

410
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGStatistics.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
3 Enter the fields for the entry:
– Source Interface — Sampled Ethernet interface.
– Owner (0-20 characters) — RMON station or user that configured the
entry.
– Max No. of Samples to Keep (1-50) — Number of samples to be
saved.
– Sampling Interval (1-3600) — The time interval in seconds between
samples.
Configuring RMON History Control Using the CLI Commands
The following table contains the CLI commands for configuring RMON
history control.
The following is an example of the CLI commands:
History Table
The History Table page displays interface-specific statistical network
samplings. Each table entry represents the counter values compiled during a
single sample.
Table 18-6. RMON History Control CLI Commands
CLI Command Description
rmon collection stats index
[owner ownername][buckets
bucket-number][interval
seconds]
no rmon collection stats index
Enables and configures RMON on an
interface.
Use the no form of this command to
remove a specified RMON history
group of statistics.
show rmon history index
{throughput|errors|other}[peri
od seconds]
Displays RMON collection history
statistics.
console(config)# interface gi0/8
console(config-if)# rmon collection stats 1 interval
2400