Dell PowerEdge VRTX - Manual (Page 119)

119
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Defining IPv6 Neighbors Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the IPv6 Neighbors pages.
The following is an example of the CLI commands:
IPv6 Routes Table
The IPv6 Routes Table describes how to reach IPv6 destinations. The routing
table is used to determine the next-hop address and the interface used for
forwarding.
Each dynamic entry also has an associated invalidation timer value (extracted
from Router Advertisements). This timer is used to delete entries that are no
Table 6-27. IPv6 Neighbors CLI Commands
CLI Command Description
ipv6 neighbor ipv6_addr interface-id
hw_addr
no ipv6 neighbor ipv6_addr interface-
id
Configures a static entry in
the IPv6 neighbor discovery
cache.
Use the no form of this
command to remove a static
IPv6 entry from the IPv6
neighbor discovery cache.
show ipv6 neighbors {static |
dynamic}[ipv6-address ipv6-address]
[mac-address mac-address] [interface-
id]
Displays IPv6 neighbor
discovery cache information.
clear ipv6 neighbors
Deletes all entries in the IPv6
neighbor discovery cache.
console# config
console(config)# ipv6 neighbor 3000::a31b vlan 1
001b.3f9c.84ea
console# show ipv6 neighbors dynamic
Interface IPv6 Address HW Address State Router
--------- ------------ ---------- ----- -----
VLAN 1 3000::a31b 0001b.3f9c.84ea Reachable Yes