Dell PowerEdge VRTX - Manual (Page 170)

170
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
To add an SNMP group, and assign it access control privileges:
1 Click System > SNMP > Access Control in the tree view to display the
Access Control: Summary page.
Previously-defined groups are displayed.
2 To add a new group, click Add, and enter the fields:
– Group Name (1-30 Characters) — Enter a group name.
– Security Model — Select the SNMP version of the group.
– Security Level — Select the security level attached to the group.
Security levels apply to SNMPv3 only. The possible options are:
•
No Authentication — Neither authentication nor the privacy
security levels are assigned to the group.
• Authentication — Authenticates SNMP messages, and ensures
that the origin of the SNMP message is authenticated.
• Privacy — Encrypts SNMP message.
– Operation — Select the group access rights. The possible options are:
•
Read — The management access is restricted to read-only, and
changes cannot be made to the assigned SNMP view. If desired,
select a view from the drop-down list.
• Write — The management access is read-write and changes can
be made to the assigned SNMP view. If desired, select a view from
the drop-down list.
• Notify — Sends traps for the assigned SNMP view. If desired,
select a view from the drop-down list.