Dell PowerEdge VRTX - Manual (Page 448)

448
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGQoS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
To create a QoS policy:
1 Click Quality of Service > QoS Advanced Mode > Policy Table to
display the Policy Table: Summary page.
The previously-defined policies are displayed.
2 To create a policy, click Add.
3 Enter the name of the new policy in the Policy Name field.
4 Add class maps to the new policy in the Policy Class Maps page.
Defining Policies Using CLI Commands
The following table summarizes the CLI commands for setting the fields in
the Policy Table page.
The following is an example of the CLI commands:
Policy Class Maps
One or more class maps can be added to a policy. A class map defines the type
of packets that are considered to belong to the same traffic flow.
To add a class map to a policy:
1 Click Quality of Service > QoS Advanced Mode > Policy Class Maps to
display the Policy Class Maps: Summary page.
2 Select a policy in the Policy Name field. The class maps in that policy are
displayed.
3 To add a class map, click Add.
4 Enter the parameters.
Table 19-15. Policy Table CLI Commands
CLI Command Description
policy-map policy-map-name
no policy-map policy-map-
name
Creates a policy map and enters the Policy-
map Configuration mode.
Use the no form of this command to
delete a policy map.
console(config)# policy-map policy1