Dell PowerEdge VRTX - Manual (Page 150)

150
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Configuring Local Users Using CLI Commands
The following table summarizes the CLI commands for configuring local
users.
The following is an example of the CLI commands:
Line Password
To add a line password for Console, Telnet, and Secure-Telnet users:
1 Click System > Management Security > Line Passwords in the tree view
to display the Line Password page.
2 Enter the fields for each type of user, separately:
– Password (0 - 80 Characters) — Enter the line password for accessing
the device.
– Confirm Password — Confirm the line password.
– Expiry Date — Displays the expiration date of the line password.
Table 6-41. Local User CLI Commands
CLI Command Description
username name {nopassword |
password password | privilege
privilege-level | unencrypted-
password | encrypted encrypted-
password}
username name
no username name
Establishes a username-based
authentication system.
Use the no form to remove a user
name.
set username name active
Reactivates a suspended user’s
access rights.
show user accounts
Displays users information.
console(config)# username bob password lee privilege
15
console# set username bob active