Dell PowerEdge VRTX - Manual (Page 380)

380
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_ARP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Creating a Dynamic ARP Inspection List Using CLI Commands
The following table summarizes the CLI commands for configuring the fields
in the Dynamic ARP Inspection List pages .
The following is an example of some of the CLI commands:
Dynamic ARP Inspection Entries
To add additional addresses to the lists defined in the Dynamic ARP
Inspection List page:
1 Click Switching > Dynamic ARP Inspection > Dynamic ARP
Inspection Entries in the tree view to display the Dynamic ARP
Inspection Entries: Summary page.
The dynamic ARP entries for the selected list are displayed.
2 To add a new address pair to a list, click Add and select the list.
3 Enter the fields:
• IP Address — Enter the IP address that will be mapped to the MAC
address entered below.
• MAC Address — Enter the MAC address that will be mapped to the
IP address entered above.
Table 16-2. Dynamic ARP Inspection List CLI Commands
CLI Command Description
ip arp inspection list
create name
no ip arp inspection list
create name
Creates a static ARP binding list and
enters the ARP list configuration mode.
Use the no form of this command to
delete the list.
console(config)# ip arp inspection list create
servers
console(config-ARP-list)#