Dell PowerEdge VRTX - Manual (Page 36)

36 Using the CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGUsing_CLI.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
After logging into the device, User EXEC command mode is enabled. The
user-level prompt consists of the host name followed by the angle bracket
(>). For example: console>
NOTE: The default host name is console unless it has been modified during
initial configuration.
The User EXEC commands enable connecting to remote devices, changing
terminal settings on a temporary basis, performing basic tests, and listing
system information.
To list the User EXEC commands, enter a question mark at the command
prompt.
To enter the next level, Privileged EXEC mode, a password is required (if
configured).
Privileged EXEC Mode
Privileged EXEC mode provides access to the device global configuration.
Privileged access can be protected, to prevent unauthorized access and to
secure operating parameters. Passwords are displayed on the screen, and are
case-sensitive.
NOTE: The enable command is only necessary if you login with privilege level less
than 15.
To access and list the Privileged EXEC mode commands:
1 At the prompt type enable and press .
2 When a password prompt displays, enter the password and press
.
The Privileged EXEC mode prompt displays as the device host name
followed by #. For example: console#
To list the Privileged EXEC commands, type a question mark at the
command prompt.
To return from Privileged EXEC mode to User EXEC mode, type
disable
and press .