Dell PowerEdge VRTX - Manual (Page 78)

78
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Defining SNTP Global Settings Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the SNTP Global Settings pages.
The following is an example of the CLI commands:
SNTP Authentication
Use the SNTP Authentication page to enable/disable SNTP authentication
between the device and an SNTP server, and to set the means by which the
SNTP server is authenticated.
To configure SNTP authentication:
1 Click System > Time Synchronization > SNTP Authentication in the
tree view to display the SNTP Authentication: Summary page.
The previously-defined authentication keys are displayed.
Table 6-7. SNTP Global Parameters CLI Commands
CLI Command Description
sntp client poll timer
seconds
no sntp client poll timer
Sets the polling time for an SNTP client.
Use the no form of this command to
restore the default configuration.
sntp broadcast client
enable
no sntp broadcast client
enable
Enables SNTP Broadcast clients.
Use the no form of this command to
disable SNTP Broadcast clients.
sntp anycast client enable
no sntp anycast client
enable
Enables SNTP Anycast clients.
Use the no form of this command to
disable SNTP Anycast clients.
sntp unicast client enable
no sntp unicast client
enable
Enables SNTP predefined Unicast clients.
Use the no form of this command to
disable SNTP Unicast clients.
show sntp configuration
Displays SNTP configuration
console(config)# sntp anycast client enable