Dell PowerEdge VRTX - Manual (Page 193)

193
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
• Boot Code — Downloads the Boot file.
6 If the Configuration Download option was selected, enter the following:
– Source File Name (1-64 Characters) — Enter the source file name.
– Destination File Name — Select the destination file to which the
configuration file is downloaded. The possible options are:
•
Running Configuration — Check to download commands into
the Running Configuration file. The current file is overwritten.
• Startup Configuration — Check to download commands into the
Startup Configuration file. The current file is overwritten.
• My Backup —Name of backup file.
• New File Name (1-64 Characters) — Check to copy commands
into a file in flash memory. Enter the filename.
7 Click Activate to start the download process.
To download files using TFTP
1 Click System > File Management > File Download in the tree view to
display the File Download page.
2 Enter the IP Format fields for the TFTP server IP address.
– Supported IP Format — Select whether IPv4 or IPv6 format is
supported.
– IPv6 Address Type — When the server supports IPv6, this specifies
the type of static address supported. The possible options are:
•
Link Local — A Link Local address that is non-routable and used
for communication on the same network only.
• Global — A globally unique IPv6 address; visible and reachable
from different subnets.
– Link Local Interface — When the server supports an IPv6 Link Local
address, this specifies the Link Local interface. The possible options
are:
•
VLAN — The VLAN on which the IPv6 interface is configured.
• ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.