Dell PowerEdge VRTX - Manual (Page 382)

382
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_ARP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
VLAN Settings
To assign a list of IP/MAC address pairs, defined in the Dynamic ARP
Inspection List pages, to a VLAN:
1 Click Switching > Dynamic ARP Inspection > VLAN Settings in the
tree view to display the VLAN Settings: Summary page.
The VLANs and their associated lists of IP/MAC address pairs are
displayed.
2 To designate a VLAN to be associated with an ARP inspection list, click
Add VLAN and enter the VLAN ID.
3 Click Assign and select the List Name to be associated with the VLAN.
Assigning IP/MAC Address Pairs to VLANs Using CLI Commands
The following table summarizes the CLI commands for configuring the fields
in the VLAN Settings pages .
The following is an example of some of the CLI commands:
Trusted Interface
Interfaces are untrusted if the packet is received from an interface outside the
network or from an interface beyond the network firewall. Trusted interfaces
receive packets only from within the network or the network firewall.
Table 16-4. Assigning IP/MAC Address Pairs to VLANs CLI Commands
CLI Command Description
ip arp inspection vlan vlan-
id
Enables ARP inspection on a VLAN, based
on the DHCP Snooping database.
Use the no form of this command to
disable ARP inspection on a VLAN.
ip arp inspection list
assign vlan-id name
no ip arp inspection list
assign vlan-id
Assigns a static ARP binding list to a
VLAN.
Use the no form of this command to
delete the assignment.
console(config)# ip arp inspection list assign 37
servers