Dell PowerEdge VRTX - Manual (Page 280)

280
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_AddressTables.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
2 Enter Address Aging (10-630). The aging time is a value between the user-
configured value and twice that value minus 1. For example, if you entered
300 seconds, the aging time is between 300 and 599 seconds.
3 To clear the table, check Clear Table.
4 To display a subset of the addresses in a particular order, enter the query
criteria and sort key under Query By, and click Query. The following fields
are displayed for entries matching the query criteria:
–
Interface — Port or LAG associated with the MAC address.
– MAC Address — Interface MAC address.
– VLAN ID — VLAN ID in the entry.
5 Address Table Sort Key TBD
Configuring Dynamic Addresses Using CLI Commands
The following table summarizes the CLI commands for configuring static
address parameters as displayed in the Dynamic Address Table pages.
The following is an example of the CLI commands:
Table 9-2. Dynamic Address CLI Commands
CLI Command Description
mac address-table aging-time
seconds
no mac address-table aging-time
Sets the aging time of the
address table.
Use the no form of this
command to restore the default.
clear mac address-table dynamic
interface interface-id
clear mac address-table secure
interface interface-id
Removes learned or secure
entries from the forwarding
database.
show mac address-table
[dynamic|static|secure] [vlan
vlan] [interface interface-id]
[address mac-address]
Displays entries in the MAC
address table.
console(config)# mac address-table aging-time 600
console# show mac address-table dynamic
Aging time is 300 sec