Dell PowerEdge VRTX - Manual (Page 179)

179
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
sent to every node listed in the trap receiver list.
Some messages are of an informational nature and are called "informs"
instead of traps.
To add notification recipients, and attach them to notification filters:
1 Click System > SNMP > Notification Recipients in the tree view to
display the Notification Recipients: Summary page.
The previously-defined notification recipients are displayed.
2 To add a new notification recipient, click Add, and enter the fields:
– Supported IP Format — Select whether the IPv4 or IPv6 format is
supported.
– IPv6 Address Type — When the recipient supports IPv6, this specifies
the type of static address supported. The possible options are:
•
Link Local — A Link Local address that is non-routable and used
for communication on the same network only.
• Global — A globally unique IPv6 address; visible and reachable
from different subnets.
– Link Local Interface — When the server supports an IPv6 Link Local
address, this specifies the Link Local interface. The possible options
are:
•
VLAN 5— The IPv6 interface is configured on this VLAN.
• ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.
– Recipient IP — The IP address to whom the traps are sent.
– Notification Type — The notification sent. The possible options are:
•
Traps — Traps are sent.
• Informs — Informs are sent.
If SNMP versions 1 and 2 are enabled for the selected recipient, enter the
fields:
–
Community String — The community string of the trap manager.
– Notification Version — The message trap SNMP version (v1 or v2).
If SNMPv3 is used to send and receive traps, enter the fields: