Dell PowerEdge VRTX - Manual (Page 454)

454
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGQoS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Defining
Policer Statistics Using CLI Commands
The following table summarizes the CLI commands for setting the fields in
the Policer Statistics pages.
The following is an example of the CLI commands:
Aggregated Policer
To view aggregated policer statistics:
1 Click Quality of Service QoS Statistics Aggregate Policer to display
the Aggregate Policer: Summary page.
The following statistics for the previously-defined counters are displayed:
–
Aggregate Policer Name — Policer on which statistics are based.
– In-Profile Bytes — Number of in-profile packets that were received.
– Out-of-Profile Bytes — Number of out-of-profile packets that were
received.
2 To add a new counter that applies to another aggregate policer, click Add.
Table 19-18. Policer Statistics CLI Commands
CLI Command Description
qos statistics policer policy-
map-name class-map-name
no qos statistics policer
policy-map-name class-map-name
Enables counting in-profile and out-of-
profile bytes vis-a-vis a policer.
Use the no form of this command to
disable counting.
clear qos statistics
Clears the statistics
show qos statistics
Displays the statistics
console(config-if)# qos statistics policer policy1
class1