Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 877)

9/Series PAL Reference Manual
Index (General)
9/Series Lathe
Index
Operation and Programming Manual
xiii
Synchronization
Coordinating, 30-10
Cycle Stop, 30-11
M-codes, 30-7
MDI Mode, 30-11
Multiple Part Programs, 30-7
Program Interrupts, 30-11
Simple, 30-8
With Setup, 30-8
Synchronized Spindle, 17-23, 17-24, 17-26
System A, G Code, 13-3
System Error Messages, B-1
System Integrator Message, 8-37
System Startup Screen, 8-37
System Timing Screen, 8-37
T
T-Word, 20-2
Programming T-word, 20-3
T-Words, 10-36
Tape Device Setup, 9-2
Tape Format, 10-1
Tape Leader, 10-4
Tape Start, Rewind, Stop Code, 10-3
Tape, Program End, 10-2, 10-3
Tape, program name for, 10-34
Tapes
Inputting Part Programs, 9-9
outputting to, 9-13
Program End, 9-8
Stop Program End, 9-8
Tapes, Auto File Name, 9-7
Tapping Cycle Left and Right Hand, 26-15, 26-17
Tapping Mode (G63), 18-18
Target Position Display, 8-9
Text, Changing Language, 8-23
Text, Language Mode, 8-23
Thread Cutting, 25-1
Thread Cutting Cycle, Considerations, 25-2
Threading
O.D. & I.D. Multipass Threading Cycle (G78), 25-20
Single Pass Threading Cycle (G21), 25-16
Single Pass Threading Mode (G33), 25-6
Single Pass Variable Lead Thread Cutting (G34),
25-12
Threading on a Shared Spindle, 30-15
Time and Parts Count Display, 2-40
Time Out, for communications, 9-6
Tool, Gauging (G37), 27-3
Tool Directory Data, 20-14
Tool Length Offset, 10-36
Tool Management, Automatic, 20-14
Tool Management, Programming, 20-26
Tool Offset Table, 3-1
Tool Offset Dimensional Parameters, 3-3
Tool Offsets, on shared axis, 30-36
Tool Offsets, Activation, 20-5
Tool Orientation Parameter, 3-6
Tool Path, Displaying, 8-24
Tool Position, Coordinate Offset, 11-13
Tool Selection, 10-36
Tool Tip Radius Compensation (TTRC)
Block Generation, (G39, G39.1), 21-8
Block Look Ahead, 21-52
Circular Transition (G39.1), 21-8
Corner Movement after Generated Blocks, 21-41
Cutter Radius Changes, 21-43
Cutting Tool Path, 21-30
Direction Changes, 21-35
Entry Moves
Type A, 21-10
Type B, 21-20
Error Detection, 21-52
Exit Moves
Type A, 21-14
Type B, 21-24
G--Codes
Circular Transition (G39.1), 21-9