Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 53)

Basic Control Operation
Chapter 2
2-31
The control is executing a threading- or multiple-pass turning cycle.
Important: Your system installer may have written PAL to disable the use
of the
{FRONT PANEL}
softkey to change modes. If this is the case, then
changing modes can be performed by using only on the
MTB panel.
Manual mode
To operate the machine manually,
select MAN or MANUAL under
or
press the
{FRONT PANEL}
softkey.
Use the left/right arrow keys to change the mode select options if using
{FRONT PANEL}
.
For details on Manual Mode operation, see chapter 4.
Figure 2.6
Manual Mode Screen
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
E-STOP
PROGRAM[ MM ] F 00000.000 MMPM
Z 00000.000 S 0
R X 00000.000 T 1
C 359.99
MEMORY MAN STOP N 99999
(First 4 blocks of
program shown here)
(PAL messages)