Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 57)

Basic Control Operation
Chapter 2
2-35
Figure 2.9
Message Active Display Screen
ERROR
LOG
CLEAR
ACTIVE
MESSAGE ACTIVE
SYSTEM MESSAGE
(The system error messages are displayed in this area)
MACHINE MESSAGE
(The logic messages are displayed in this area)
This is the information displayed on the MESSAGE ACTIVE screen. The
control displays up to 9 active system messages and up to 10 machine
messages. The machine messages represent the currently active logic
messages located on 13 lines through 22 of the 9/Series display screen.
Important: For a listing of system messages and a brief description, refer
to appendix B. For a description of machine messages, refer to the
documentation prepared by your system installer.
3. Press the
{ERROR LOG}
softkey to enter the MESSAGE LOG screen
shown in Figure 2.10.
ERROR
LOG
CLEAR
ACTIVE
(softkey level 2)
The control displays the logged messages in sections dedicated to:
system logged messages in the top half of the screen
machine logged messages (logic generated) in the bottom half of
the screen