Rainbow Electronics AT91CAP9S250A - Manual (Page 98)

98
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
15.4.3 Reset Controller Mode Register
Register Name: RSTC_MR
Access Type: Read/Write
• URSTEN: User Reset Enable
0 = The detection of a low level on the pin NRST does not generate a User Reset.
1 = The detection of a low level on the pin NRST triggers a User Reset.
• URSTIEN: User Reset Interrupt Enable
0 = USRTS bit in RSTC_SR at 1 has no effect on rstc_irq.
1 = USRTS bit in RSTC_SR at 1 asserts rstc_irq if URSTEN = 0.
• ERSTL: External Reset Length
This field defines the external reset length. The external reset is asserted during a time of 2 (ERSTL+1) Slow Clock cycles. This
allows assertion duration to be programmed between 60 µs and 2 seconds.
• KEY: Password
Should be written at value 0xA5. Writing any other value in this field aborts the write operation.
31 30 29 28 27 26 25 24
KEY
23 22 21 20 19 18 17 16
– – – – – – –
15 14 13 12 11 10 9 8
– – – – ERSTL
7 6 5 4 3 2 1 0
– – URSTIEN – – – URSTEN