Rainbow Electronics AT91CAP9S250A - Manual (Page 498)

498
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
Figure 34-19. TWI Read Operation with Multiple Data Bytes with or without Internal Address
Internal address size = 0?
Start the transfer
TWI_CR = START
Stop the transfer
TWI_CR = STOP
Read Status register
RXRDY = 1?
Last data to read
but one?
Read status register
TXCOMP = 1?
END
Set the internal address
TWI_IADR = address
Yes
Yes
Yes
No
Yes
Read Receive Holding register (TWI_RHR)
No
Set the Control register:
- Master enable
TWI_CR = MSEN + SVDIS
Set the Master Mode register:
- Device slave address
- Internal address size (if IADR used)
- Transfer direction bit
Read ==> bit MREAD = 1
BEGIN
Set TWI clock
(CLDIV, CHDIV, CKDIV) in TWI_CWGR
(Needed only once)
No
Read Status register
RXRDY = 1?
Yes
Read Receive Holding register (TWI_RHR)
No