7 receive status register – Rainbow Electronics AT91CAP9S250A User Manual
Page 816
816
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
42.5.7
Receive Status Register
Register Name:
EMAC_RSR
Access Type:
Read/Write
This register, when read, provides details of the status of a receive. Once read, individual bits may be cleared by writing 1
to them. It is not possible to set a bit to 1 by writing to the register.
• BNA: Buffer Not Available
An attempt was made to get a new buffer and the pointer indicated that it was owned by the processor. The DMA rereads
the pointer each time a new frame starts until a valid pointer is found. This bit is set at each attempt that fails even if it has
not had a successful pointer read since it has been cleared.
Cleared by writing a one to this bit.
• REC: Frame Received
One or more frames have been received and placed in memory. Cleared by writing a one to this bit.
• OVR: Receive Overrun
The DMA block was unable to store the receive frame to memory, either because the bus was not granted in time or
because a not OK
hresp(bus error)
was returned. The buffer is recovered if this happens.
Cleared by writing a one to this bit.
31
30
29
28
27
26
25
24
–
–
–
–
–
–
–
–
23
22
21
20
19
18
17
16
–
–
–
–
–
–
–
–
15
14
13
12
11
10
9
8
–
–
–
–
–
–
–
–
7
6
5
4
3
2
1
0
–
–
–
–
–
OVR
REC
BNA