Rainbow Electronics AT91CAP9S250A - Manual (Page 685)

685
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
Figure 39-3. Message Acceptance Procedure
If a mailbox is dedicated to receiving several messages (a family of messages) with different
IDs, the acceptance mask defined in the CAN_MAMx register must mask the variable part of
the ID family. Once a message is received, the application must decode the masked bits in the
CAN_MIDx. To speed up the decoding, masked bits are grouped in the family ID register
(CAN_MFIDx).
For example, if the following message IDs are handled by the same mailbox:
ID0 101000100100010010000100 0 11 00b
ID1 101000100100010010000100 0 11 01b
ID2 101000100100010010000100 0 11 10b
ID3 101000100100010010000100 0 11 11b
ID4 101000100100010010000100 1 11 00b
ID5 101000100100010010000100 1 11 01b
ID6 101000100100010010000100 1 11 10b
ID7 101000100100010010000100 1 11 11b
The CAN_MIDx and CAN_MAMx of Mailbox x must be initialized to the corresponding values:
CAN_MIDx = 001 101000100100010010000100 x 11 xxb
CAN_MAMx = 001 111111111111111111111111 0 11 00b
If Mailbox x receives a message with ID6, then CAN_MIDx and CAN_MFIDx are set:
CAN_MIDx = 001 101000100100010010000100 1 11 10b
CAN_MFIDx = 00000000000000000000000000000110b
If the application associates a handler for each message ID, it may define an array of pointers
to functions:
void (*pHandler[8])(void);
When a message is received, the corresponding handler can be invoked using CAN_MFIDx
register and there is no need to check masked bits:
unsigned int MFID0_register;
MFID0_register = Get_CAN_MFID0_Register();
// Get_CAN_MFID0_Register() returns the value of the CAN_MFID0 register
pHandler[MFID0_register]();
CAN_MIDx CAN_MAMx Message Received
& &
==
Message Accepted
Message Refused
No
Yes
CAN_MFIDx