Rainbow Electronics AT91CAP9S250A - Manual (Page 959)

959
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
47. AT91CAP9 Electrical Characteristics
47.1 Absolute Maximum Ratings
47.2 DC Characteristics
The following characteristics are applicable to the operating temperature range: T
A
= -40°C to 85°C, unless otherwise spec-
ified and are certified for a junction temperature up to T
J
= 100°C.
Table 47-1. Absolute Maximum Ratings*
Operating Temperature (Industrial).............-40
°
C to +85
°
C *NOTICE: Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of
the device at these or other conditions beyond those
indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reli-
ability.
Storage Temperature .................................-60°C to +150°C
Voltage on Input Pins
with Respect to Ground ................................ -0.3V to +4.0V
Maximum Operating Voltage
(VDDCORE, VDDBU, VDDUPLL and VDDUTMIC) .....1.5V
Maximum Operating Voltage
(VDDIOM
,
VDDIOP0, VDDIOP1, VDDIOMPA,
VDDIOMPB, VDDPLL, VDDUTMII and VDDANA) .......4.0V
Total DC Output Current on all I/O lines ..................500 mA
Table 47-2. DC Characteristics
Symbol Parameter Conditions Min Typ Max Units
V
VDDCORE
DC Supply Core 1.08 1.32 V
V
VDDBU
DC Supply Backup 1.08 1.32 V
V
VDDPLL
DC Supply PLL 3.0 3.6 V
V
VDDUPLL
DC Supply USB PLL 1.08 1.32 V
V
VDDIOM
DC Supply
Memory I/Os
Selectable by Software in Bus Matrix 1.65/3.0 1.95/3.6 V
V
VDDIOP0
DC Supply
Peripheral 0 I/Os
3.0 3.6 V
V
VDDIOP1
DC Supply
Peripheral 1 I/Os
1.65 3.6 V
V
VDDIOMPA
DC Supply
MP Block I/O A lines
1.65 3.6
V
VDDIOMPB
DC Supply
MP Block I/O B lines
1.65 3.6
V
VDDUTMII
DC Supply
USB UTMI Interface
3.0 3.6 V
V
VDDUTMIC
DC Supply
USB UTMI Core
1.08 1.32 V
V
VDDANA
DC Supply ADC 3.0 3.6 V
V
IL
Input Low-level Voltage -0.3 0.8 V