Rainbow Electronics AT91CAP9S250A - Manual (Page 775)

775
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
41.10.1 MCI Control Register
Name: MCI_CR
Access Type: Write-only
• MCIEN: Multi-Media Interface Enable
0 = No effect.
1 = Enables the Multi-Media Interface if MCDIS is 0.
• MCIDIS: Multi-Media Interface Disable
0 = No effect.
1 = Disables the Multi-Media Interface.
• PWSEN: Power Save Mode Enable
0 = No effect.
1 = Enables the Power Saving Mode if PWSDIS is 0.
Warning: Before enabling this mode, the user must set a value different from 0 in the PWSDIV field (Mode Register
MCI_MR).
• PWSDIS: Power Save Mode Disable
0 = No effect.
1 = Disables the Power Saving Mode.
• SWRST: Software Reset
0 = No effect.
1 = Resets the MCI. A software triggered hardware reset of the MCI interface is performed.
31 30 29 28 27 26 25 24
– – – – – – – –
23 22 21 20 19 18 17 16
– – – – – – – –
15 14 13 12 11 10 9 8
– – – – – – – –
7 6 5 4 3 2 1 0
SWRST – – – PWSDIS PWSEN MCIDIS MCIEN