8 interrupt status register – Rainbow Electronics AT91CAP9S250A User Manual
Page 817
817
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
42.5.8
Interrupt Status Register
Register Name:
EMAC_ISR
Access Type:
Read/Write
• MFD: Management Frame Done
The PHY maintenance register has completed its operation. Cleared on read.
• RCOMP: Receive Complete
A frame has been stored in memory. Cleared on read.
• RXUBR: Receive Used Bit Read
Set when a receive buffer descriptor is read with its used bit set. Cleared on read.
• TXUBR: Transmit Used Bit Read
Set when a transmit buffer descriptor is read with its used bit set. Cleared on read.
• TUND: Ethernet Transmit Buffer Underrun
The transmit DMA did not fetch frame data in time for it to be transmitted or
hresp
returned not OK. Also set if a used bit
is read mid-frame or when a new transmit queue pointer is written. Cleared on read.
• RLE: Retry Limit Exceeded
Cleared on read.
• TXERR: Transmit Error
Transmit buffers exhausted in mid-frame - transmit error. Cleared on read.
• TCOMP: Transmit Complete
Set when a frame has been transmitted. Cleared on read.
• ROVR: Receive Overrun
Set when the receive overrun status bit gets set. Cleared on read.
• HRESP: Hresp not OK
Set when the DMA block sees
a bus error
. Cleared on read.
• PFR: Pause Frame Received
Indicates a valid pause has been received. Cleared on a read.
• PTZ: Pause Time Zero
Set when the pause time register, 0x38 decrements to zero. Cleared on a read.
31
30
29
28
27
26
25
24
–
–
–
–
–
–
–
–
23
22
21
20
19
18
17
16
–
–
–
–
–
–
–
–
15
14
13
12
11
10
9
8
–
–
PTZ
PFR
HRESP
ROVR
–
–
7
6
5
4
3
2
1
0
TCOMP
TXERR
RLE
TUND
TXUBR
RXUBR
RCOMP
MFD