Avago Technologies LSI53C1000R - Manual (Page 215)

SCSI Registers 4-103
Version 2.2 Copyright © 2000–2003 by LSI Logic Corporation. All rights reserved.
Note: The receive rate is independent of the settings of the
XCLKS_DT, XCLKS_ST, XCLKH_DT, and XCLKH_ST bits.
Synchronous Send Rate Calculation
The synchronous send rate, in megatransfers/s, can be
calculated using the following formula:
Receive Rate (ST)
Input Clock Rate
SCF Divisor 4
×
-------------------------------------------- =
Send Rate (DT)
Input Clock Rate
SCFDivisor 2
XCLKS_DT XCLKS_ST + XCLKH_DT + XCLKH_ST +
2
----------------------------------------------------------------------------------------------------------------------------------------------------- 

+  
 
×



----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- =
Send Rate (ST)
Input Clock Rate
SCFDivisor 4 XCLKS_ST XCLKH_ST
)
+ +
( Ч
------------------------------------------------------------------------------------------------------------------------ =