Rockwell Automation 1747-PT1, D1747NP002 Hand-Held Terminal - Manual (Page 390)

Chapter 27
The Status File
27–22
Fault Classification Processor
Description User
Address
Error
Code
(Hex)
I/O Errors Non-User Non-Recov Recov 5/02
5/01,
Fixed
S:6
xx5C
M0–M1 file configuration error – user program M0–M1 file
size exceeds capacity of the module. X
•
xx5D Interrupt service requested is not supported by the processor. X
•
xx5E Processor I/O driver (software) error. X
•
xx60 thru
xx6F
Identifies an I/O module specific recoverable major error.
Refer to the user manual supplied with the specialty module. X
•
xx70 thru
xx7F
Identifies an I/O module specific non-recoverable major error.
Refer to the user manual supplied with the specialty module. X
•
xx90 Interrupt problem on disabled slot. X
•
xx91 A disabled slot has faulted. X
•
xx92 Invalid or non-existent module interrupt subroutine file. X
•
xx93 Unsupported I/O module specific major error. X
•
xx94
In the run or test mode, a module has been detected as
being inserted under power. Can also mean that an I/O
module has reset itself. X
•