Eeprom burning options, Burning eeproms for a slc 5/02 processor – Rockwell Automation 1747-PT1, D1747NP002 Hand-Held Terminal User Manual
Page 213
Chapter 14
Using EEPROMs and UVPROMs
14–5
10.Press [
F2
]. The prompt line indicates
XFERRING MEMORY MODULE
TO PROC
momentarily, then returns to this display:
Program Directory
Programmer
Processor
Prog:
1000
Prog:
1066
File:
222
File:
Exec Files:
4
Exec Files:
3
Data Files:
9
Data Files:
9
PROGRAM FILES DIFFER
F1
F2
F3
F4
F5
OFFLINE
UPLOAD
DWNLOAD
PRG
MODE
CLR_PRC
A copy of the EEPROM program has been transferred to the processor.
You can burn a program into an EEPROM memory module using a processor
that is different from the one used to run the program. The following
conditions describe how to accomplish this.
Burning EEPROMs for a SLC 5/01 Processor or Fixed Controller
As long as the program does not exceed the memory size of the processor
that burns the EEPROM, you can use one SLC 5/01 processor or fixed
controller to burn the EEPROM program and another SLC 5/01 processor or
fixed controller to actually run it. The I/O and rack configurations of the
processors do not have to match, however, the processor and I/O
configuration must match the EEPROM program in order to enter the Run
mode. If you do, a major fault will occur.
You cannot use a SLC 5/02 processor to burn a program configured for a
SLC 5/01 processor or fixed controller. A program configured for a SLC
5/01 processor or fixed controller can only be downloaded to a SLC 5/01
processor or fixed controller.
Burning EEPROMs for a SLC 5/02 Processor
You can use one SLC 5/02 processor to burn the EEPROM program, and
another SLC 5/02 processor to actually run it. The I/O and rack
configurations of the two processors do not have to match, however, the
processor and I/O configuration must match the EEPROM program in order
to enter the Run mode. If you do, a major fault will occur.
You cannot use a SLC 5/01 processor or fixed controller to burn a program
configured for a SLC 5/02 processor. A program configured for a SLC 5/02
processor can only be downloaded to a SLC 5/02 processor.
EEPROM Burning Options