Rockwell Automation 1747-PT1, D1747NP002 Hand-Held Terminal - Manual (Page 185)

Chapter 11
Processor Modes
11–3
2. Press [F4] , MODE.
The following display appears:
File Name: 222 Prog Name:1000
File Name Type Size(Instr)
0 System 77
1 Reserved 0
2 222 Ladder 13
3 Ladder 1
F1 F2 F3 F4 F5
RUN TEST
PRG
PROGRAM
3. Change the processor to the Run mode by pressing [F1] , RUN. The
display requests you to confirm your selection:
File Name: 222 Prog Name:1000
File Name Type Size(Instr)
0 System 77
1 Reserved 0
2 222 Ladder 13
3 Ladder 1
ARE YOU SURE?
F1 F2 F3 F4 F5
YES NO
PRG
4. Press [F2] , YES. The display changes as follows:
File Name: 222 Prog Name:1000
File Name Type Size(Instr)
0 System 77
1 Reserved 0
2 222 Ladder 13
3 Ladder 1
F1 F2 F3 F4 F5
RUN TEST
RUN
PROGRAM
Display toggles between the
processor node address and
the processor operating
mode, which is now Run.