Rockwell Automation 1747-PT1, D1747NP002 Hand-Held Terminal - Manual (Page 203)

Chapter 13
The Force Function
13–5
3. Press [ F2 ], OFF. All rungs are false. Program operation is back to the
starting point. The display shows FORCE OFF , but the force is still
enabled.
ON OFF REM REM_ALL DISABLE
] [
F RUN
F1 F2 F3 F4 F5
XIC: I1:0.0/1 FORCE OFF 2.0.0.0.1
( )
( )
]/[ ] [
]/[ ] [
]/[
( )
( )
] [
] [
] [
To disable and/or remove forces, you can select DISABLE, REM, or
REM ALL.
4. Remove the force by pressing [ F3 ], REM. NO FORCE indicates the force is
removed and disabled. The F no longer appears to the left of RUN. The
FORCED I/O LED of the processor is off.
] [
RUN
ON OFF REM REM_ALL ENABLE
F1 F2 F3 F4 F5
XIC: I1:0.0/1 NO FORCE 2.0.0.0.1
( )
( )
]/[ ] [
]/[ ] [
]/[
( )
( )
] [
] [
] [
5. Press [ ESC ] to exit the force function:
] [
RUN
MODE FORCE EDT DAT SEARCH
F1 F2 F3 F4 F5
XIC: I1:0.0/1 NO FORCE 2.0.0.0.1
( )
( )
]/[ ] [
]/[ ] [
]/[
( )
( )
] [
] [
] [