Rockwell Automation 1747-PT1, D1747NP002 Hand-Held Terminal - Manual (Page 214)

Chapter 14
Using EEPROMs and UVPROMs
14–6
Burning EEPROMS for SLC Configurations
If you have a SLC 5/02 processor or SLC 5/01 4k processor, you can burn
EEPROMs for any fixed, SLC 5/01, or SLC 5/02 program.
You may choose to use UVPROM modules. These modules are protected
against electrical erasure. You can transfer a program from the UVPROM to
the processor, but you cannot transfer a program to the UVPROM.
To transfer a program from a UVPROM memory module to the processor
RAM, follow the “Transferring A Program from an EEPROM” procedures
earlier in this chapter.
Program loading is done with a commercially available PROM programmer,
and a:
•
1747–M5 adapter
•
1747–M3 or 1747–M4 UVPROM
•
either a 1747–M1 or 1747–M2 complementary EEPROM containing the
program to be transferred to the 1747–M3 or 1747–M4 UVPROM
•
or a copy of the program in an INT INTELLEC 8/MDS Hex file format
as created by the Advanced Programming Software PROM Translator
Utility. Refer to the APS User Manual.
The 1747–M1 or 1747–M2 EEPROM would contain the program to be
transferred to the 1747–M3 or 1747–M4 UVPROM.
UVPROM Memory Modules