Rockwell Automation 1747-PT1, D1747NP002 Hand-Held Terminal User Manual

Page 160

Chapter 8
Compiling and Saving a Program

8–2

2. To save this program and continue editing, press

[F4]

, SAVE_CT. To

save this program and exit offline editing, press

[F5]

, SAVE_EX.

If you are using a SLC 5/02 processor, the following display appears:

Compiler Options

TSTRUNG

FUTACC

OFL

Future Access:

Yes

MODIFY OPTIONS, ACCEPT TO COMPILE

Test Single Rung:

Disable

Index Across Files:

Disallow

File Protection:

Outputs

MODIFY OPTIONS, ACCEPT TO COMPILE OFL

INDXCHK

FILEPRT

Important: The above display appears if you have a SLC 5/02. If you have

a fixed controller or a SLC 5/01 processor only

[F1]

and

[F5]

appear.

Function Key

Description

[

], Future Access – Fixed, SLC 5/01, and SLC

5/02 processors

Toggles between Yes and No. This option allows
you to protect proprietary program data and
algorithms. The protection takes affect only after
the processor file is downloaded to a controller.

[

], Test Single Rung – SLC 5/02 processor

Toggles between Enable and Disable. This
option allows you to execute your program one
rung at a time or a section at a time. Use this
function for debugging purposes.

[

], Index Checks – SLC 5/02 processor

Toggles between Allow and Disallow. This
option allows you to use indexed addressing to
address data table elements outside of the base
address data file.

[

], File Protect – SLC 5/02 processor

Toggles between Outputs, None, and All. This
option allows you to protect your data table files
from external modification by devices on the
DH–485 network.

[

], ACCEPT

Starts the compile.

3. After you have made your selections press

[F5]

, ACCEPT.