Lenze 8400 HighLine - Manual (Page 93)

Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
93
3 Commissioning
3.10 PC manual control
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.10.3 Set/reset home position
The measuring system in the machine is selected by means of homing and the 0 position is set
within the possible physical travel range.
The changeover to the "Homing" operating mode is effected by selecting the option of the same
name on the Positioning tab:

How to set the reference manually with standing drive:
Click the Set reference button.
The current actual position in the machine measuring system now corresponds to the
home position set in C01227/2 (Lenze setting: 0.0000 units).

Detailed information on the "Homing" operating mode is provided in chapter "Basic
drive functions" in subchapter " Homing ". ( 546)

Stop!
If you set the reference with PC manual control, the drive is referenced with it.
If another home position is used for normal operation:
Click the Cancel reference button and reset the status signals HomPosAvailable and
HomePosDone in the MCK status word in order that no mechanical problems can occur
during normal operation.
• Setpoints and actual positions remain untouched until a renewed reference setting or
homing.