Lenze 8400 HighLine - Manual (Page 1322)

17 Function library
17.1 Function blocks
1322
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
17.1.67 L_Curve_1
This FB can optionally display a characteristic function or a curve function y=f(x), the X axis being
the input signal and the Y axis being the output signal.
• A limitation of the input value can be set in C00961/1 (upper limit) and C00961/2 (lower limit).
• The output value is internally limited to ±199.99 %. If a limitation of the output value is active,
bLimit is set to TRUE.
Inputs
Outputs
Parameter
Identifier
Data type
Information/possible settings
nIn_a
INT
Input value (x)
• ±16384 ≡ ±100 %
• A limitation of the input value can be set in C00961/1 (upper limit) and C00961/2
(lower limit).
Identifier
Data type
Value/meaning
nOut_a
INT
Output value (y)
• ±16384 ≡ ±100 %
• Internal limitation to ±32767 (±199.99 %)
bLimit
BOOL
"Limitation active" status signal
TRUE The output value is limited to ±199.99 %.
Parameter Possible settings Info
C00959
From version 11.00.00
-199.99 % 199.99 Output value
• Read only
C00960 Function selection
0 nOut_a = 0 (FB deactivated) Lenze setting
1 nOut_a = nIn_a
2 nOut_a = f(x)
In preparation!
3 nOut_a = f(table)  Function 3: nOut_a = f(table)
C00961/1 -199.99 % 199.99 Upper limit for input value
• Lenze setting: 199.99 %
C00961/2 -199.99 % 199.99 Lower limit for input value
• Lenze setting: -199.99 %
/B&XUYHB
Q2XWBD Q,QBD
E/LPLW
& )XQFWLRQ
[
\
[ \
&
&
&[ ;9DOB
&[ <9DOB
&