Lenze 8400 HighLine - Manual (Page 1520)

17 Function library
17.2 System blocks
1520
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Related topics:
 Overview of function blocks available ( 1233)
 Working with the FB Editor ( 1181)
LS_ParFree32 Output of 8 parameterisable 32-bit signals
• This SB is available from version 11.00.00.
 
LS_ParFreeUnit
LS_ParFreeUnit_2
Output of 16 parameterisable position signals with internal
conversion of [unit] in [increments]
• These SBs are available from version 11.00.00.
 
LS_ParReadWrite_1
...
LS_ParReadWrite_6
Reading/Writing of local parameters
• These SBs are available from version 04.00.00.
 
LS_PulseGenerator Output of 9 fixed frequencies and 1 parameterisable frequency  
LS_RetainData Selection and saving of retain data
• This SB is available from version 11.00.00.
 
LS_SetError_1 Parameterisable responses to user-defined events are tripped
 Diagnostics & error management ( 615)
 
LS_SetError_2  
LS_SyncManagement Output of status information for synchronising the internal time
base
 Synchronisation of the internal time base ( 774)
 
LS_TouchProbe Interface for touch probe detection
 Touch probe detection ( 353)
• This SB is available from version 06.00.00.
 
LS_WriteParamList Interface to the basic "Parameter change-over" function
 Parameter change-over ( 776)
• This SB is available from version 04.00.00.

System block Function can be inserted into
level:
I/O Appl.