Lenze 8400 HighLine - Manual (Page 75)

Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
75
3 Commissioning
3.8 Commissioning of the "Table positioning" technology application
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4. Recommendation: Set an offset in the Homing home offset input field ( C01227/1 ) to prevent
the machine from stopping at an activated limit switch.
Background: The load machine can also leave the travel range limit switch. There follows a
return to the home position that was set with the positive edge of the travel range limit switch.
5. Set suitable profile parameters for the homing:
6. After setting the parameters for the homing, click the Back button to change back to the
Overview  Signal flow dialog level.
Parameter Lenze setting Info
Value Unit
S-ramp time
( C01226/1 )
0.000 s S-ramp time for reference search/homing.
• Setting "0 s" ≡ no rounding
Start speed
( C01224/1 )
720.0000 unit/s Starting speed for approaching the pre-stop signals.
Start acceleration
( C01225/1 )
720.0000 unit/s 2 Starting acceleration for the starting speed ramps.