Lenze 8400 HighLine - Manual (Page 1223)

Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
1223
16 Working with the FB Editor
16.4 Reconfiguring the predefined interconnection
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6. Click Insert to insert the selected elements into the target interconnection as defined.
• Only possible if at least one element in the list has been selected for insertion.
• Insertion is also possible via the button if at least one element is selected from
the list for insertion.
• The original layout and the relative position of the inserted blocks to each other are
maintained.
• When copying across the devices, you also insert the corresponding separate technical
objects (e.g. port definition).
• The inserted elements are deleted from the list. If the list is empty, the dialog box is
closed and the connections are inserted depending on the selected option.
7. If there are still elements to be entered in the list, repeat steps 5 and 6 until all elements are
inserted as intended.
8. Press Close to stop the insertion and close the dialog box.
• You can also use or to close the dialog box if "Insert" is not active.
• The elements inserted into the target interconnection so far are maintained.
• The connections for the blocks inserted so far are inserted depending on the selected
option.