C01300 | profile data: positioning mode, C01300/x, C01300/1 – Lenze 8400 HighLine User Manual
Page 1086: For the selected profile, Lue set in, Is no, Is used, Ositioning mode = setting in, Sitioning mode = setting in, Positi
15
Parameter reference
15.2
Parameter list | C01300
1086
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01300
Parameter | Name:
C01300 | Profile data: Positioning mode
Data type: UNSIGNED_8
Index: 23275
d
= 5AEB
h
Selection of the positioning mode for profiles 1 ... 15
Selection list
Info
1 Absolute (shortest path)
Absolute positioning
• The profile position corresponds to the target
position.
2 Continuous
Continuous positioning without approaching a target
position
3 Relative
Relative positioning
• The profile position determines the distance to be
traversed.
4 absolute (Cw)
From version 06.00.00
Clockwise absolute positioning
• The zero position of the axis can be exceed in this
direction.
• The profile position corresponds to the target
position.
5 absolute (Ccw)
From version 06.00.00
Counter-clockwise absolute positioning
• The zero position of the axis can be exceed in this
direction.
• The profile position corresponds to the target
position.
8 Absolute (shortest path) to TP
From version 06.00.00
Absolute positioning
• The profile position corresponds to the target
position.
• After a touch probe is detected, the TP profile
(
) is executed.
9 Continuous to TP
From version 06.00.00
Continuous positioning without approaching a target
position
• After a touch probe is detected, the TP profile
(
) is executed.
10 Relative to TP
From version 06.00.00
Relative positioning
• The profile position determines the distance to be
traversed.
• After a touch probe is detected, the TP profile
(
) is executed.
11 Absolute (Cw) on TP
From version 06.00.00
Clockwise absolute positioning
• The zero position of the axis can be exceed in this
direction.
• The profile position corresponds to the target
position.
• After a touch probe is detected, the TP profile
(
) is executed.
12 Absolute (Ccw) on TP
From version 06.00.00
Counter-clockwise absolute positioning
• The zero position of the axis can be exceed in this
direction.
• The profile position corresponds to the target
position.
• After a touch probe is detected, the TP profile
(
) is executed.