Lenze 8400 HighLine - Manual (Page 889)

Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
889
15 Parameter reference
15.2 Parameter list | C00441
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00441
C00442
Parameter | Name:
C00441 | Decoupling AnalogOut
Data type: UNSIGNED_16
Index: 24134
d
= 5E46
h
From version 04.00.00
Configuration defining the events that lead to a decoupling of the analog output terminals.
 Configuring exception handling of the output terminals
Setting range (min. hex value | max. hex value) Lenze setting
0x0000 0xFFFF 0x0000 (decimal: 0)
Value is bit-coded: ( = bit set)
Bit 0  SafeTorqueOff
Bit 1  ReadyToSwitchOn
Bit 2  SwitchedOn
Bit 3 
Reserved
Bit 4  Trouble
Bit 5  Fault
Bit 6 
Reserved
Bit 7  Reserved
Bit 8  Reserved
Bit 9  Fail CAN_Management
Bit 10  Reserved
Bit 11  Reserved
Bit 12  Reserved
Bit 13  Reserved
Bit 14  Reserved
Bit 15  Reserved
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C00442 | AOutx: Decoupling value
Data type: INTEGER_16
Index: 24133
d
= 5E45
h
From version 04.00.00
Definition of the value the analog output terminals are to have in the decoupled state.
 Configuring exception handling of the output terminals
Setting range (min. value | unit | max. value)
0.00 % 100.00
Subcodes Lenze setting Info
C00442/1 0.00 % AOut1_U: Decoupling value
C00442/2 0.00 % AOut2_U: Decoupling value
C00442/3 0.00 % AOut1_I: Decoupling value
C00442/4 0.00 % AOut2_I: Decoupling value
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100