Lenze 8400 HighLine - Manual (Page 570)

8 Basic drive functions (MCK)
8.7 Manual jog
570
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.7.1.4 Time-based start of second speed
If this function has been activated by means of bit 1 in C01230 and a waiting time > "0 s" has been
set in C01235/1 , an automatic change-over to manual jog speed 2 takes place when the manual jog
function is activated and after the waiting time has expired.
• When the waiting time is set = 0 s, the automatic change-over is deactivated.
[8-30] Time-based start of second speed

Tip!
By leaving the corresponding button for manual jog pressed down for longer than the
waiting time and parameterising manual jog speed 2 so that it is higher than manual jog
speed 1, you can enable longer distances to be travelled by means of manual jogging with
this function.
Time-based start deactivated
( C01230 - bit 1 = 0; Lenze setting)
Time-based start activated
( C01230 - bit 1 = 1)
 C01231/1 : Manual jog: Speed 1
 C01231/2 : Manual jog: Speed 2
 C01235/1 : Waiting time 2nd speed (Lenze setting: 5 s)
n
t
TRUE
FALSE
ManJogPos
t
Œ

Ž
n
t
TRUE
FALSE
ManJogPos
t
Œ

Ž