Lenze 8400 HighLine - Manual (Page 918)

15 Parameter reference
15.2 Parameter list | C00579
918
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00579
C00580
C00581
Parameter | Name:
C00579 | Resp. to max. speed/output freq. reached
Data type: UNSIGNED_8
Index: 23996
d
= 5DBC
h
Response when the max. speed limit ( C00909 ) or output frequency limit ( C00910 ) has been reached.
Selection list (Lenze setting printed in bold)
0 No Reaction
1 Fault
5 Warning
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00580 | Resp. to operating system error
Data type: UNSIGNED_8
Index: 23995
d
= 5DBB
h
From version 11.00.00
Response if the required computing time of the application exceeds the available computing time.
Selection list
0 No Reaction
1 Fault
5 Warning
Subcodes Lenze setting Info
C00580/1 0: No Reaction Resp. to runtime exceedance
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00581 | Resp. to LS_SetError_x
Data type: UNSIGNED_8
Index: 23994
d
= 5DBA
h
Selection of the error responses for application error messages
• An application error message is tripped by a FALSE/TRUE edge at the binary inputs bSetError1...4.
Selection list
0 No Reaction
1 Fault
2 Trouble
3 TroubleQuickStop
4 WarningLocked
5 Warning
6 Information
Subcodes Lenze setting Info
C00581/1 0: No Reaction LS_SetError_1 : Resp. to bSetError1
C00581/2 0: No Reaction LS_SetError_1 : Resp. to bSetError2
C00581/3 0: No Reaction LS_SetError_1 : Resp. to bSetError3
C00581/4 0: No Reaction LS_SetError_1 : Resp. to bSetError4
C00581/5 0: No Reaction LS_SetError_2 : Resp. to bSetError1
C00581/6 0: No Reaction LS_SetError_2 : Resp. to bSetError2
C00581/7 0: No Reaction LS_SetError_2 : Resp. to bSetError3
C00581/8 0: No Reaction LS_SetError_2 : Resp. to bSetError4
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1