Konica Minolta bizhub PRESS C8000e - Manual (Page 670)

14.1 Main Body Specifications 14
bizhub PRESS C8000/e 14-4
ISO standard sizes are used for B series by default. For ISO/JIS switching, please contact your service rep-
resentative. With the machine set to use JIS standard sizes, K sizes can also be used when specified from
the Utility menu. Without the setting change from ISO standard sizes to JIS standard sizes, K sizes cannot
be allowed even if specified from the Utility menu.
Foolscap refers to 8 e 13 w, 8.12 e 13.2 w, 8.25 e 13 w, or 8.5 e 13 w.
Warm-up time 7.0 minutes or less (20°C, 50% RH, 230 V)
Power requirements Rated voltage: AC 220 to 240 V
Rated current: 24 A
Rated frequency: 50/60 Hz
Power consumption 5,760 W
Option configuration: same as above
Weight Main body: 450 kg
2nd Fusing Unit EF-101: 95.5 kg
Dimensions Main body:
900 (W)
*1
e 950 (D)*2 e 1,319 (H)
*3
mm
2nd Fusing Unit EF-101:
500 (W) e 771 (D) e 1,020 (H) mm
Main body + 2nd Fusing Unit EF-101 + Paper Feeder Unit
(with scanner) PF-705 + Relay Unit RU-508 + Large Ca-
pacity Stacker LS-505 + Perfect Binder PB-503:
4,974 (W) e 950 (D)
*2 e 1,319 (H) *3 mm
*1: Excepting control panel, exit tray, work table
*2: Including rear duct
*3: Excepting control panel
Space requirements 5,196 (W)
*1*3
e 1,584 (D)
*2*3
mm
(Main body + 2nd Fusing Unit EF-101 + Paper Feeder Unit
PF-704 + Relay Unit RU-508 + Large Capacity Stacker
LS-505 + Perfect Binder PB-503 + Image Controller IC-
306)
*1: Supposing Image Controller IC-306 positioned 5 mm
side of Paper Feeder Unit
*2: With the fixing conveyance unit pulled out
*3: Keep 500 mm or more space free on the back, and
100 mm or more on both sides of the machine.
Operating temperature 10°C to 30°C
Humidity 10 to 80% RH