Konica Minolta bizhub PRESS C8000e - Manual (Page 253)

bizhub PRESS C8000/e 6-37
6.8 Loading Paper 6
5
Pushing the lock release lever of the front side guide, move
both side guides to align the small size guides to the paper.
Turn the two guide fixing knobs of the side guides clockwise to
fix the guides.
6
Align the rear guide to the paper.
% Pressing the lock release lever, align the rear guide to the
edge of paper.
NOTICE
Be sure that the rear guide is securely aligned to the paper. If
any gap is left between the rear guide and paper, the machine
cannot detect the correct paper size, and machine trouble may
be caused.
7
Push in the tray until it locks into place.
The Amount indicator of the tray will change from to on the Machine Screen and Copy
Screen.
NOTICE
Do not bump the tray into the main body. Otherwise, loaded small size paper may be out of position and
you may not obtain the desired print result. Also, machine trouble may be caused due to unexpected
shock.
6.8.6 Loading Paper in Post Inserter of Folding Unit FD-503
Change the settings of upper tray or lower tray of the post inserter in [Paper Setting] from the Machine
Screen or Copy Screen.
1
Load paper in the upper tray/lower tray of the post inserter.
The Amount indicator of the tray will change from to
on the Machine Screen and Copy Screen.
2
Align the side guides to the paper.
NOTICE
Do not load more than 500 sheets (80 g/m
2
) for each of the upper tray and lower tray. Also, do not
load above the limit line indicated on the side guides.