Konica Minolta bizhub PRESS C8000e - Manual (Page 332)

9.2 [01 Machine Adjustment] 9
bizhub PRESS C8000/e 9-14
9
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
% Adjustable range: -40 (Front) to +40 (Back) (1 step = 0.1 mm)
10
Repeat the steps from 4 to 9 until the desired result is obtained.
11
Press [Return] to restore the Printer Adjustment Menu Screen.
9.2.3 [01 Printer Adjustment] - [03 FD-Mag. Adjustment]
Adjust the magnification in paper feed direction in the printer engine. This adjustment value will be the stand-
ard for Both Sides Adjust in Paper Setting.
Objects of adjustment: Printer FD-Mag., Tray 1 Offset (ADU) to Tray 9 Offset (ADU)
d
Reference
An identification mark can be printed on sample patterns to identify the sides of paper and used paper tray.
For details, please contact your service representative.
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [01 Machine Adjustment], [01 Printer Adjustment], and [03 FD-Mag. Adjustment] in sequence.
The FD-Mag. Adjustment Screen will be displayed.
3
Press the key of the object to be adjusted.
4
Press [Print Mode].
5
Load A3 w paper into the tray to be adjusted, then select that tray key.
6
Press Start on the control panel. A sample pattern will be output.