Konica Minolta bizhub PRESS C8000e - Manual (Page 541)

bizhub PRESS C8000/e 10-127
10.13 [02 Administrator Setting] - [07 Security Setting] 10
5
Press [02 HDD ALL Restore] to restore all data onto the HDD.
% Please be aware that all the data on the HDD will be cleared if HDD ALL Restore fails during the
operation or is canceled.
The total quantity of the data to be restored is displayed in the message area of the screen.
% Pressing [Start] on the screen displays the dialog to ask you for approval of overwriting all the data
on the HDD. Press [Yes] to initiate the restoring operation for all the data onto the HDD.
% The screen provides the percent complete while restoring operation is in progress.
% If the restoring operation fails, an error dialog will be displayed. Press [Close] to restart the restoring
operation. Turning the sub power switch off then on without restarting the restoring operation will
clear all the data on the HDD.
% When the restoring operation for all data is completed, turn the sub power switch off then on.