Konica Minolta bizhub PRESS C8000e - Manual (Page 114)

3.4 Using Machine When Power Save LED Lights 3
bizhub PRESS C8000/e 3-50
3.4 Using Machine When Power Save LED Lights
If you find the Power Save LED lit, the machine is inactive due to the Power Save or Weekly Timer function.
You cannot operate the machine with either of the functions activated.
3.4.1 Operation to Enable the Machine
1
Press any key on the control panel.
% If the machine makes no response with any key pressed on
the control panel, press Power Save.
If Power Save has been activated, the machine will be ready for
printing.
If Weekly Timer has been activated, the Machine Screen will be
displayed with the message [Weekly timer is temporarily can-
celed / Please enter password] in the message area. Entering
the password allows you to use the machine temporarily. See
page 3-52 for details.
% The Power Save function has two modes: Auto Low Power and Auto Shut OFF. See the following
description for details.
% Power Save can also be activated manually. See page 3-52 for details.