Konica Minolta bizhub PRESS C8000e - Manual (Page 351)

bizhub PRESS C8000/e 9-33
9.5 [03 Finisher Adjustment] (Folding Unit FD-503) 9
7
Measure the lengths (a) and (b) of the output sheet.
Allowance: a +/- 1.5 mm, b +/- 1.5 mm
8
If any adjustment is required, press [Exit Print Mode] to return to the Tri-Fold-out Position Adjustment
Screen.
9
Select [Single Fold].
10
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
% Adjustable range: -50 (Short) to +50 (Long) (1 step = 0.1 mm)
% The measurement (a) in step 7 will increase with positive value entered, and decrease with negative
value entered.
11
Select [Double Fold].
12
Repeat step 10.
% The measurement (b) in step 7 will increase with positive value entered, and decrease with negative
value entered.
13
Repeat the steps from 4 to 12 until the desired result is obtained.
14
Press [Return] to restore the Multi Folder (Fold) Adjustment Menu Screen.
Paper size a b
11 e 17 w 289.9 mm 147.9 mm
A3 w 282.0 mm 144.0 mm
B4 w 236.3 mm 119.6 mm
8.5 e 14 w 238.1 mm 120.5 mm
A4 w 199.0 mm 101.0 mm
8.5 e 11 w 187.3 mm 95.1 mm
8K w 262.0 mm 134.0 mm
12 e 18 w 306.8 mm 156.4 mm
SRA4 w 214.3 mm 108.6 mm
[1] Single Fold [2] Double Fold