Konica Minolta bizhub PRESS C8000e - Manual (Page 466)

10.2 [01 User Setting] - [01 System Setting] 10
bizhub PRESS C8000/e 10-52
10.2.13 [08 Operation/Info. Sound Setting] - [02 Info. Sound Item Setting]
Specify the repeat count of information sound or voice message that sounds when a job stops due to paper
misfeed or paper out, and also specify whether or not to enable the sound individually for given items.
1
Follow the procedure on page 10-3 to display the User Setting Menu Screen.
2
Press [01 System Setting], [08 Operation/Info. Sound Setting], and [02 Info. Sound Item Setting] in se-
quence.
3
Select the desired repeat count for each of the information sound and voice message, using the keys
provided under "Repeat Number Setting."
4
Set the information sound for the machine stoppage item by item, using the keys provided under "No-
tice Set for Machine Stop."
% To enable the information sound, select the desired sound type. Press [Check] to check the selected
sound.
% Press [OFF] to disable the information sound.
5
Press [Next] in the lower left corner of the screen to continue the setting.
% The "Job Complete Pre-notice" provided under "Other Notification Setting" allows you to specify
whether or not to enable the information sound depending on the time to elapse before the job com-
pletion. Press [Detail Setting], then select the desired time. Press [OK] to complete the setting and
return to the previous screen.
6
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the Operation/Info. Sound Setting Menu
Screen will be restored.