Konica Minolta bizhub PRESS C8000e - Manual (Page 333)

bizhub PRESS C8000/e 9-15
9.2 [01 Machine Adjustment] 9
7
Measure the resultant magnification in the paper feed direction.
Allowance: +/- 0.5% or less (full size)
Within 205.7 +/- 1 mm
8
If any adjustment is required, press [Exit Print Mode] to return to the FD-Mag. Adjustment Screen.
9
Use the touch panel keypad or control panel keypad to enter the setting data.
% Use [+/-] to specify the value to be positive or negative.
% Press [Set] to change the current data.
% Adjustable range: -100 (Short) to +100 (Long) (1 step = 0.01%) Tray 1 Offset (ADU) to Tray 9 Offset
(ADU): -80 (Short) to +20 (Long) (1 step = 0.01%)
10
Repeat the steps from 4 to 9 until the desired result is obtained.
11
Press [Return] to restore the Printer Adjustment Menu Screen.
9.2.4 [01 Printer Adjustment] - [04 CD-Mag. Adjustment]
Adjust the magnification in crosswise direction in the printer engine.
Objects of adjustment: Printer CD-Mag., Tray 1 Offset (ADU) to Tray 9 Offset (ADU)
d
Reference
An identification mark can be printed on sample patterns to identify the sides of paper and used paper tray.
For details, please contact your service representative.
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [01 Machine Adjustment], [01 Printer Adjustment], and [04 CD-Mag. Adjustment] in sequence.
The CD-Mag. Adjustment Screen will be displayed.
3
Press the key of the object to be adjusted.
4
Press [Print Mode].