Konica Minolta bizhub PRESS C8000e User Manual
Page 170
5.2
Paper Setting
5
bizhub PRESS C8000/e
5-30
22
Press [Air Assist].
The Air Assist Screen will be displayed.
With a tray from [Tray 4] to [Tray 9] selected in step 5, the following Air Assist Screen will be displayed.
Select either [Auto] or [Manual].
Selecting [Manual] enables the following 4 settings:
% Use [Weak] and [Strong] provided under [Lead Edge Air Level Setting] to select the desired air level
within the range from [1] to [9].
% Use [Weak] and [Strong] provided under [Side Air Level Setting] to select the desired air level within
the range from [1] to [9].
% Select either [Active (Strong)] or [Normal (Standard)] under [Lead Edge Nozzle Change].
% Select one from [Active (Strong)], [Normal (Standard)], and [OFF] under [Side Duct Up/Down].
% For the paper feeder unit tray, you can open the confirmation window for the air nozzle and modify
the air assist settings while visually checking feeding. See page 5-51 for details.
Pressing [Air Assist] with [PB] of Perfect Binder PB-503 selected in step 5 will display another type of
the Air Assist Screen as shown below.
Select [Auto], [ON], or [OFF], as desired.
Press [OK].